LDX-026A Factory direct sales of large TCT circular saw blade automatic grinding machine
Multi-blade saw gear grinding machine to reduce machine noise should take the following measures:
1,Gear parts that have a greater impact on noise (focusing on several pairs of high-speed transmission gears Z 45/ Z 20, Z 26/ Z 60, etc.) are modified and some weight reduction holes are made to make the tooth shape curve of the gear teeth convex and reduce the sound propagation area. Experiments show that gear noise is mainly caused by end-face radiation. The larger the surface area, the larger the radiated noise value. The drilling can reduce the radiated area of noise, so the noise reduction effect can be achieved.
2,When machining gears, controlling the base of the pinion to make it slightly larger than the base of the big gear can reduce noise. Because the base of the pinion is slightly reduced due to the deformation of the force when meshing. This can be controlled by sharpening the hob front Angle, usually increasing the hob front Angle of the hob cutting pinion.
3,Machine tool noise is a system engineering caused by many factors, and gear noise is only one of them. Gear accuracy is also an aspect of causing gear noise, other factors such as motors, shafts, bearings, boxes, etc., are factors that can not be ignored. At present, the research is continuing to make the noise of the milling machine stable at 81d B (A) level to meet the export level requirements.
| Technical parameters: |
| Processing saw blade diameter range: ￠300- ￠ 1800mm |
| Saw blade aperture: ￠ 10-220mm |
| Saw blade thickness (steel plate): 1-12mm |
| Tooth pitch: 7-120mm |
| Tooth surface angle: 5 degrees to+30 degrees |
| Tooth top back angle: 6-45 degrees |
| Left and right inclination of teeth: tooth tip/tooth surface 45 degrees |
| Blade grinding stroke range: maximum 25mm (adjustable) teeth/minute |
| Grinding speed: 0.5-6mm/s |
| Working speed: maximum 20 teeth/minute |
| Grinding wheel size (outer diameter x hole): (￠ 125mm x ￠32mmX1mm) |
| Negative chamfer grinding: -27 degrees |
| Grinding head rotatable angle: 90 degrees and 180 degrees |
| Grinding wheel linear speed: 26m/s |
| Flow rate of coolant water pump: 501/min |
| Volume of coolant cylinder: 85L |
| Total power: 2.2 kW |
| Voltage: three-phase 380v |
| Mechanical weight: 1200KG |
| Mechanical dimensions (length x width x height): 1800X1400X1800mm |
| Technical features: |
| The design of this machine refers to the characteristics of similar domestic and foreign models, absorbs and analyzes the advantages of the same type, and makes some functional improvements. This equipment is specifically designed for grinding large alloy saw blades. |
| 1. Pre set multiple sets of tooth profiles for one click multifunctional operation. |
2. The flat teeth of the ladder can be completed in one go, with CNC grinding and any tooth shape, which can increase efficiency by three times; Improved gear extraction operation to improve accuracy and extend service life.
|
Product Tags:
|
|
Large TCT Circular Saw Blade Automatic Grinding Machine LDX-026A Images
|
